RockySea Petro Non-Magnetic Drill CollarThe non-magnetic drill collar is made of low chromium manganese alloy steel, which is forged through strict chemical composition analysis. All non-magnetic drill collars produced from RockySea Petro have been tested for mechanical properties to ensure that their hardness, toughness, impact value and corrosion resistance meet the standards, with good low magnetic permeability and good machining performance.Description The structure of non-magnetic dri
VIEW DETAILSRockySea Petro F Series Mud PumpData sheetFunction1. Cool the drill bit and lubricate the rotating drill string.2. Remove rock debris from the bottom of the well and send it back to the surface;3. Balance or control the pressure of oil, gas, and water layers in the drilled well section to prevent blowout;4. Make mud cakes on the wellbore to prevent collapse;5. Handle complex underground situations. When encountering fractured formations, pump in plugging materials, and when encountering stuck d
VIEW DETAILSRockySea Petro Anti-Corrosion Downhole PumpRockySea Petro is the best Special Pump Manufacturers for Anti-corrosion Downhole Pump.RockySea Petro has developed the downhole pumps with various processes of boronizing, nitriding, chrome plating, tungsten plating for corrosive oil wells.RockySea Petro has successfully developed brass and stainless steel sucker rod pumps using precision rolling process.It is one of the most professional Anti-corrosion Downhole Pump Manufacturers and SuppliersSanjcak has 40 years’ experienc
VIEW DETAILSRockySea Petro Self-Tensioning Guy-Wire Workover RigFeaturesA workover rig with guy-line is a double drum workover rig that installs wind loaded guy-wires on the main engine.There is no need to install wind loaded guy-wires with ground anchors, which greatly improves the efficiency of workover operations, reduces operating costs and labor intensity.Also it has features as the following:(1) Suitable for small well site operations, reducing the operation area of the entire workover rig.(2) All te
VIEW DETAILSRockySea Petro Casing Stop RingDatasheetUseWhen using the top thread stop ring, the following steps should be followed.1. When using the fixed screw type, first insert the sleeve, then insert the screw and use a hammer to strike.2. The conventional stop ring should be inserted into the sleeve first, and then the screw should be tightened with a wrench.3. Snap on the locking ring, directly attach the locking ring to the sleeve, lock it with a pin, and then tap in the screw.TypeThe stop rings of
VIEW DETAILSRockySea Petro Flush by Unit
Data sheet
Applications
RSR of Sanajck can efficiently and quickly complete various oilfield workover operations as the following:
1).Heavy duty workover service
Drilling service
Downhole stuck freeing service
Sealing and channeling service
Casing shaping service
Casing repair service
2).Shallow- to high-depth well interventions, including:
Killing wells
Flushing productions wells
Changing wellhead valves
Pressure-testing wells.
Changing polished rods
Spacing and respacing rod strings
3).Continuous rod and conventional sucker rod interventions,including
Pulling and replacing casing service
Sidetrack service
Changing insert of pcp
Changing rotors of pcp,
Features
1. It has a small volume, low footprint, strong mobility, and can be deployed to smaller well sites than standard repair rigs.
2. In emergency situations, the hydraulic rod safety clamp can apply up to 32200 kilograms (71000 pounds) of clamping force as additional braking force.
3. High traction capacity, increasing the depth range that can be served.
4. Only 3 to 4 people are needed to operate, reducing work risks.
5. 30 minutes for quick assembly is enough which improves work efficiency.
Description
Flush by unit of Sanajck is specially designed for conventional rod and continuous rod service. It combines the characteristics of pressure trucks and small rod drilling rigs. It is used for diagnosing and troubleshooting oil wells with advantages of quick deployment and safe operation. The Rapid service rig consists of a reservoir, a three cylinder pump, an independent mast assembly, safety equipment, and other accessories. By cooperating with standard or heavy-duty syringes, this device can effectively trip and serve continuous rods without the use of additional equipment. Flush by unit of RockySea can provide services for shallow to high depth oil, gas, and coalbed methane wells with vertical wellhead configurations.What’s more, RockySea Petro flush by unit occupies a smaller construction area than traditional workover rigs and can also perform all types of oil well diagnosis and maintenance work. When a well is offline, the unit will quickly identify problems such as oil pipe holes, pump malfunctions or jamming, and drill pipe fractures, and then immediately perform the necessary maintenance workover.
Besides, Rapid service rig can be assembled by three to four operators in less than 30 minutes, while assembling a standard workover rig takes about 4 hours, greatly improving work efficiency, reducing work intensity and risk.
RockySea Petro: A Pioneer in Flush by Unit Manufacturing in China
Flush by unit of RockySea is specially developed for drilling and workover service solution, even heavy duty. With rapid deployment and safe operation, the Flush by unit can service high-depth oil, gas, and coalbed methane (coal-seam gas) wells in vertical wellhead configurations. Besides, the flush by unit is also called Rapid service rig or RSR.
1.Flush by unit of Sanajck greatly improves the efficiency of workover operation, reduces labor intensity and risk.
2.Flush by unit of Sanajck has obtained GB, SY , API and ISO standards with CCC certification.
3.Sanajck has an all-weather response team and can dispatch professional personnel for on-site services.
Send us your requirement, Let RockySea Petro support you !
RockySea Petro Copyright © 2008-2025 Inc. SITEMAP
