‌RockySea Petro Sand Well Recovery Sucker Rod PumpAnti-sand pump for heavy oil.Isodiametric-plunger pump.Sand-scraping pumpLong plunger and sand stuck prevention pumpB type anti-sand centralizing sucker rod pump.For now, there are a few technologies about how to solve the sand problem during oil recovery production, like adopting a hydraulic jet pump to flush out sand, mechanical anti-sand technology, and chemical anti-sand technology. Now you can take a look at sanJack’s sand control sucker rod pu

‌RockySea Petro Large Displacement Tubing PumpNote: if our client needs different specifications and models of special oil well pump, we can also design and manufacture according to the parameters and requirements provided by the client.These special oil well pumps have novel structure, reliable performance, superior pump efficiency, and long service life, and have been widely used in various oilfields.RockySea Petro has developed a series of special oil well pumps suitable for different well conditions.Bas

‌RockySea Petro Heavy Oil Recovery Downhole PumpRockySea Petro is the best Heavy oil recovery pump Manufacturers for Heavy oil recovery pump wholesale.20 years of manufacturing experience in Rod Pump40 years’ experience in designing and manufacturing downhole pumps.Participated in the draw up of the national standard of downhole pump.40 years’ experience in designing and manufacturing downhole pumps.Your Premier Heavy Oil Recovery Downhole Pump Manufacturers And SuppliersDeviated Well Oil ProductionThe

‌RockySea Petro Kelly BarRockySea Petro has abundant experience in R & D, production and sales of Kelly bars. The Kelly bar is located at the top of the drill string, and its main function is to transmit torque and bear the total amount of the drill string. The end face of the driving part of Kelly is divided into square and regular hexagon, which are most used in oil drilling Kelly is about three times thicker than drill pipe and made of high strength alloy steel, so it has high tensile strength and t

‌RockySea Petro Casing Stop RingDatasheetUseWhen using the top thread stop ring, the following steps should be followed.1. When using the fixed screw type, first insert the sleeve, then insert the screw and use a hammer to strike.2. The conventional stop ring should be inserted into the sleeve first, and then the screw should be tightened with a wrench.3. Snap on the locking ring, directly attach the locking ring to the sleeve, lock it with a pin, and then tap in the screw.TypeThe stop rings of