other
HOT PRODUCT
  • Casing Stop Ring
    Casing Stop Ring

    ‌RockySea Petro Casing Stop RingDatasheetUseWhen using the top thread stop ring, the following steps should be followed.1. When using the fixed screw type, first insert the sleeve, then insert the screw and use a hammer to strike.2. The conventional stop ring should be inserted into the sleeve first, and then the screw should be tightened with a wrench.3. Snap on the locking ring, directly attach the locking ring to the sleeve, lock it with a pin, and then tap in the screw.TypeThe stop rings of

    VIEW DETAILS
  • Pneumatic Diaphragm Metering Pump
    Pneumatic Diaphragm Metering Pump

    ‌RockySea Petro Pneumatic Diaphragm Metering PumpPneumatic diaphragm pump is a new type of conveying machinery, which is the most novel pump in China at present. Compressed air is used as the power source to pump out all kinds of corrosive liquids, liquids with particles, high viscosity, volatile, flammable and highly toxic liquids. The pneumatic diaphragm metering pump is a new product developed by RockySea in recent years and is used in various special occasions.Application1. Food Processing/Bi

    VIEW DETAILS
  • Gas Recovery Wellhead And X-Mas Tree
    Gas Recovery Wellhead And X-Mas Tree

    RockySea Petro Gas Recovery Wellhead And X-Mas TreeSuperior gas tight performance and pressure/corrosion proof performance.The sealing surface is very hard and fits accurately.Metal spray valve gate and seat.Excellent sealing performance and small rotating torque.Special structures composite stem seal.RockySea Petro has more than 40 years of experience in wellhead and christmas tree production, with advanced manufacturing and testing equipment, can produce a variety of pressure levels, material levels, spe

    VIEW DETAILS
  • Float Collar and Float Shoe
    Float Collar and Float Shoe

    ‌RockySea Petro Float Collar and FloatData sheetAdvantageRockySea has extensive experience in manufacturing float hoops and shoes, and its products have the following advantages.1) The reliable valve body structure reduces the resistance of cement slurry flow.2) All internal accessories are drillable and have the same diameter as the casing.3) The special structural design effectively prevents the backflow of cement slurry.4) The buckle can be processed into BTC/LTC/STC/VAM/FOX/TP-CQ/OTTM accordi

    VIEW DETAILS
  • Hydril Annular BOP
    Hydril Annular BOP

    ‌RockySea Petro Hydril Annular BOPThe Hydril Annular BOP has carried out rigorous tests, such as magnetic particle, ultrasonic, pressure test and and so on.Do the pressure analysis to pressured and forced parts with 3D software to check the strength of Hydril Annular Blowout Preventer.RockySea Petro Petro designs various types of Hydril Annular BOP according to the International standard.RockySea Petro Petro has more than 20 years of experience in oil wellhead and Hydril Annular BOP production, with advanced manuf

    VIEW DETAILS

Sinker Bar

Date:2024-05-08 Popularity:670

RockySea Sinker Bar



Sinker bars of RockySea Petro are exported to the United States, Canada, Europe, Africa and Middle East, and we establish cooperative relationships with international customers all over the world.

RockySea Petro owns a strong ability about research, design and production of sinker bar with decades of manufacturing experience. RockySea Petro has been certified by ISO9001,  ISO14001 and OHSAS18001.RockySea Petro adopts the principle of combining intl standards, national standards and users’ views for design.


Description

Grade and material

The current edition of intl standards recognizes two grades of sinker bars,Grade 1 Carbon steel and Grade 2 Alloy steel. Below are the material examples

  • AISI 4623 Nickel-Molybdenum Alloy Steel 90,000 psi minimum tensile.
  • AISI 1024 Plain Carbon Steel 65,000 psi minimum tensile
Sinker bar also have C,D,K strength grades as sucker rods. In general terms  Grade 1 is referred to as Grade C while Grade 2 is referred to as Grade K depending on material alloy type.

Sinker Bar is heavier than the conventional rod. It is used at the bottom of the sucker rod string to keep the rod string under tension and reduce crooks of the sucker rod string during downward travel.Sinker bars provide concentrated weight above the pump to help keep the rod string straight and in tension, which reduces buckling of the sucker rods or the pump plunger. Sinker bars are made of hot rolled carbon manganese steel bar. Sinker bars are surface turned and have  double sucker rod pins, shoulders, and wrench flats on both ends. One end has a reduced section for elevator seating and lifting.


Features

External diameter (mm)External thread
dimensions (mm)
Wrench square
width (mm)
Wrench square
length (mm)
Sinker bar
length  (mm)
Mechanical
properties
1 1/4(31.75)5/8(15.9)SR25.431.87600;91001. Class-1:
tensile strength≥448MPa
1 1/4(31.75)3/4(19.1)PR25.431.87600;9100
1 3/8(34.93)5/8(15.9)SR25.431.87600;9100
1 3/8(34.93)3/4(19.1)PR25.431.87600;9100
1 1/2(38.1)3/4(19.1)SR33.338.17600;91002. Class-2:
tensile strength≥620MPa
1 5/8(41.28)7/8(22.2)SR33.338.17600;9100
1 3/4(44.45)7/8(22.2)SR38.141.37600;9100

 

RockySea Petro Copyright © 2008-2025 Inc. SITEMAP